Is that lost key bothering you? You are desperate to find the key but still wonder, “How to drill out the ignition lock cylinder?” You do not need to worry at all. We are here to help you successfully drill out the ignition lock cylinder. Therefore we will be looking at the exact definition of an ignition lock cylinder while discussing what is behind it. We will also discuss the differences between an ignition switch and an ignition lock cylinder. Then we will move on to topics like the reasons behind a faulty ignition lock cylinder and how to drill out the ignition lock. At last, we will see what we should be doing after removing the ignition lock cylinder.
What is an Ignition Lock Cylinder?
Identifying the actual definition of an ignition lock cylinder will be quite useful as detecting errors with your ignition lock and with your ignition switch can be easily identified with the correct definition and the comprehension that comes from the definition.
Thus now we will see the definition of the ignition lock cylinder, which is a mechanical component in your car that directly interacts with starting your car.
The ignition lock cylinder can typically be seen in the ignition switch, the main house of the electrical elements that limit the ignition.
This is often located near the steering column, behind the steering wheel vision on the right side. However, modern vehicles adopt a press-and-start technology rather than the traditional ignition procedure.
However, the traditional system has yet to be extinct. Thus the acknowledgment of the ignition lock cylinder will befit you in the long run.
What is Behind the Ignition Lock Cylinder?
What is behind the ignition lock cylinder? Why does it matter? It does matter because behind the ignition lock cylinder. It locates the most important part of this system, the “contact block,” known as the electrical part.
This part is the segment that ensures that the movements of the key are transformed into the surfaces of the specific set of wires with the impact of tension. Therefore, this segment ultimately follows the responsibility of determining the accessory and starting modes.
Now we will see how the mechanism of this contact block works with its physical appearance as well. The middle of the contact block remains a yellow horizontal slot which will impact the determination of the right key.
How does this work? When the user inserts the key into the ignition, the key will directly connect with this yellow segment if you have inserted the correct key.
What is the Difference Between an Ignition Switch and an Ignition Lock Cylinder?
In order to discuss the difference between the ignition switch and the ignition lock cylinder, you must first know these two separately. Therefore we are going to discuss what an ignition lock cylinder is first.
With the word meaning, you can understand that the ignition lock cylinder is some lock associated with the ignition’s power. In order to activate this particular lock, you have to insert the key, and the procedure of the ignition lock cylinder is a mechanical process.
Now we will see what an ignition switch is, An ignition switch is a more complex electrical element that needs to power through the coding of the key to allow it the power to start the vehicle.
Therefore as you can understand, the main difference between the two is that the ignition lock cylinder is mechanical while the switch is electrical. The cylinder contains the front half of the operation, while the switch carries the rear part of the operation.
How Do I Know If My Ignition Lock Cylinder is Bad?
The ignition lock cylinder is like other auto industry mechanisms that eventually will show signs of destruction and disease. Therefore comprehending the signs of destruction and diseases related to the ignition lock cylinder.
The faulty ignition lock cylinders can be worn out or may be malfunctioning. The reason behind these flaws can be the inattentive insertion of the key into the ignition lock cylinder, which will ultimately damage the interior components of the lock cylinder.
Moreover, the furious insertion of the key can also break the key leading up to the full removal of the lock cylinder.
Furthermore, the key getting stuck inside can be a sign that says there’s a possibility that your ignition lock cylinder is faulty. Thus these symptoms of the potential risks of a faulty ignition lock cylinder can let you be cautious about your actions that cause these signs of destruction.
How to Drill Out an Ignition Lock Cylinder?
The appearance of complications in your ignition switch can be solved by drilling out the ignition lock cylinder. However, it is more complicated than we speak of it. Thus the execution of this drilling out process needs the exact equipment and the necessary knowledge about the procedure. Thus now we will see what equipment is necessary to execute drilling out an ignition lock cylinder.
- A marker pen
- Philips screwdriver
- Flat screwdriver
- A pair of safety glasses
- A pair of safety gloves
- A drill
- Hardened drill bits
After acquiring this equipment, follow the instruction given below A-Z.
- First, you must take precautions to ensure that you are safe while doing this process. Therefore, disconnect the battery by opening the hood and cutting off the power supply.
- Remove the plastic covers and the steering wheel surrounding the ignition lock cylinder.
- Thirdly, make sure to have a plan of drilling drawn in mind on the cylinder. Upon this step, you will reduce the chance of having a mistake.
- Then start drilling. Ensure you follow the plan you have sketched out in the cylinder as well.
- Voila! You have drilled out the ignition lock cylinder successfully.
What to Do After the Ignition Lock Cylinder is Removed?
Removal of the ignition lock cylinder does not mean that the vehicle can run without that. Hence, you must reinstall or replace another ignition lock cylinder on your vehicle. Therefore we are going to swim through the materials that are needed to replace an ignition lock cylinder.
- A new ignition lock cylinder
- A flashlight
- Scanning tools
- Flat blade screwdriver
After acquiring this material, you can proceed with the procedure mentioned above, and at the end, you can place the new lock cylinder and screw the unscrewed parts again. Thus the removal was reinstalled with a new ignition lock cylinder.
However, please do not make the state of your ignition lock cylinder that bad to the point where you will also have to remove and replace another new ignition lock cylinder, which will cost high if you can’t do that yourself.
Watch this one,
Video Credits – Ratchets And Wrenches
You May Also Like
